After solving the nerve-racking clogging issue on the 3D printer i was finally able to print the case top part. I did not spend much time for a shiny finish, i will do that when i’m bored, which probably never will happen …
As always if a prototype is beeing build, there are small unforeseen issues in the design. You can take care of all what could be wrong, but there is always something wrong. The joystick can’t do a full move in both axes, the TFT display is not centered, the slot for the SD card is … , the footprint drawing for the NKK smart switches was wrong, all the keys are tilted slightly.
So now there is the big task to do a lot of programming and creating icons/sprites for the LCDs …
geniusss rustronics 